Automatic Counting Packing Machine for Mixed Fasteners Connectors Hardware Kit with 2 Vibratory Feeders

This automatic fastener counting and bagging machine,is suitable for screws packaging,rivets packing,anchor bolts packaging, furniture connectors packaging.

  • No.: YLM-320V2-CP
  • Brand: EASYREALM
  • Product Introduction

    Automatic Mixed Fastener Counting Packaging Machine with Two Vibratory Feeders

    • Mixed parts of incorrect counting number or wrong mixing are automatically separated and recycled, and are not packed in o bags, which avoid film waste.

    • This counting packing machine is especially suitable for the packaging situation with very high accuracy requirements.

    • In case the sealing device clamps or the cutter cuts the objectives, any other parts of this bagging machine will not be damaged.

    • Automatically mixed packaging of a variety of small parts, greatly saving labor cost.

    • Vibratory feeder, easy to change.

    • Vibratory feeders need not be adjusted each time for different size and length of parts packed.

    • Set the required number of parts packed and package number on the 7-inch color touch screen, the machine can do packaging accurately.

    • Pneumatic pillow-pack bagging machine has the advantages of the small footprint, low noise.

    • Mitsubishi PLC control system is easy to use, stable and durable.

    • Minimal maintenance requirements.

    • Infrared optical counting system, faster and with high accuracy.

    • Intelligent temperature controller.

    • The machine stops automatically while vibratory feeder lacking in material.

    • Bag forming, filling, sealing and cutting is done in one time

  • Product Applications

    Easyrealm Co., Ltd

    Easyrealm Co., Ltd

    • take-away conveyor

    • highly sensitive checkweighers

    • Sponge soundproof housing

    • Automatic labeler

    • Gas(Nitrogen) flush device

    • Tear notch device

    • Round or Euro hole punch device

    • Alarm light

    • Automated feeding system

    • Code printer

  • Product Packing

    • This automatic fastener packing machine is suitable for screw packaging, mixed hardwre packaging in bags:

    • Hardware Parts: nuts bolts joint, nuts, bolts, screws, pins, steel nails, washers, rivets, fasteners, etc.

    • Rubber Parts/Plastic Parts: wall anchors, O-rings, pipe clips, rubber housing, molded parts, etc.

    • Furniture Hardware: furniture connectors, furniture fasteners, furniture fittings, furniture accessories, cabinet hardware, door hardware, lock hardware, hinge hardware.

    • Toys: small rubber toys, LEGO building bricks, dice, etc.

    • Foods & Pills: tablet capsule, effervescent tablet, milk tablet, jelly beans, sugar-coating tablet, non-sticky Candies, etc.

    • Others: kitchen hardware, bike hardware, computer hardware, electronic hardware parts, etc.

      Easyrealm Co., Ltd

  • Product Specification

    Bag  Lengthmax. 280mm(bag pulling  twice)
    Bag  Width70-150mm (forming device  needs changing for different size)
    Film  Widthmax. 320 mm
    Packing  Speed20-150 bag/min (according  to characristics of parts packed, film, number of parts per bag
    Counting  MethodInfrared optical counting  system / track positioning
    Number  of Parts per BagAs long as the bag can  accomodate
    Bag  Typepillow pack or three side  sealed
    Sealing  Width10 mm
    Bag  Forming Devicepneumatic sealing and  cutting
    Cutting  Methodpattern welded knife
    Bag  Length Controlsetting on touch screen /  photoelectric sensor
    Air  Discharging Methodair hole
    Linking  Bagfunction of bag linking  can be set on touch screen
    Air  pressure0.4-0.8Mpa (air compressor  prepared by customer)
    Voltage220V 50Hz or customized
    Power2.0 Kw
    Overall  SizeCustomized

  • Product Videos