Automatic Nuts Bolts Screws Fasteners Mixed Hardware Packing Machine with 4 Vibratory Feeders

This automatic counting packing machine, is suitable for mixed hardware packing, such as fastener packaging, nuts bolts screws packing, furniture fittings packing.

  • No.: YLM-260V4-CP
  • Brand: EASYREALM
  • Product Introduction

    Mixed Hardware Counting Packing Machine with Four Vibratory Feeders

    • Automatically mixed packaging of a variety of small parts, greatly saving labor cost.

    • Equipped with a material clamp detection device, to make sure that the machine will not clamp material and does not need to stop during operation. In this way, the finished products are in good condition, and the life of cutter is prolonged.

    • Vibratory feeder, easy to change, four vibratory feeders can do the feeding simultaneously or separately.

    • Vibratory feeders need not be adjusted each time for different size and length of parts packed.

    • Set the required number of parts packed and package number on the 7-inch color touch screen, the machine can do packaging accurately.

    • Pneumatic pillow-pack bagging machine has the advantages of the small footprint, low noise.

    • Mitsubishi PLC control system is easy to use, stable and durable.

    • Minimal maintenance requirements.

    • Tow truck collection, plain and simple.

    • Infrared optical counting system, faster and with high accuracy.

    • Intelligent temperature controller.

    • The machine stops automatically while vibratory feeder lacking in material.

    • Bag forming, filling, sealing and cutting is done in one time.

  • Product Applications

    Easyrealm Co., Ltd

    • Take-away conveyor

    • Highly sensitive checkweighers

    • Sponge soundproof housing

    • Automatic labeler

    • Gas(Nitrogen) flush device

    • Tear notch device

    • Round or Euro hole punch device

    • Alarm light

    • Automated feeding system

    • Code printer

    Easyrealm Co., Ltd

    How to use the hardware counting bagging packing machine? Read this.

    1. Plug in power and feed 6-8 kg air source; turn on the bagging machine to heat it (to the pre-designed bag sealing condition) ;

    2. Pour the material-to-be-packed in o the vibratory feeders, start it and adjust the vibrating frequency;

    3. Set the numbers of parts per bag on the touch screen, and then set the length of the bag according to this;

    4. Turn on the code printing machine for heating, to automatic temperature control state; make sure that bag forming beautiful, and cursor positioning is good;

    5. Set the production capacity, and press the start button.

  • Product Packing

    Easyrealm Co., Ltd

    This automatic hardware counting packing machine is suitable for mixed packaging of several types of small parts or assembly kits in bags:

    • Hardware Parts: nuts bolts joint, nuts, bolts, screws, pins, steel nails, washers, rivets, fasteners, etc.

    • Rubber Parts/Plastic Parts: wall anchors, O-rings, pipe clips, rubber housing, molded parts, etc.

    • Furniture Hardware: furniture connectors, furniture fasteners, furniture fittings, furniture accessories, cabinet hardware, door hardware, lock hardware, hinge hardware.

    • Toys: small rubber toys, LEGO building bricks, dice, etc.

    • Foods & Pills: tablet capsule, effervescent tablet, milk tablet, jelly beans, sugar-coating tablet, non-sticky Candies, etc.

    • Others: kitchen hardware, bike hardware, computer hardware, electronic hardware parts, etc.

  • Product Specification

    Bag Lengthmax. 300mm(bag pulling twice
    Bag Width25-150mm (forming device needs changing for different size)
    Film Widthmax. 320 mm
    Packing Speed10-25 bag/min (according to characristics of parts packed, film, number of parts per bag
    Counting MethodInfrared optical counting system / track positioning
    Quantity of Parts per BagAs long as the bag can accomodate
    Bag Typepillow pack or three side sealed
    Seam Width10 mm
    Bag Forming Devicetrunk forming device, pneumatic sealing and cutting
    Cutting Methodpattern welded knife
    Bag Length Controlsetting on touch screen / photoelectric sensor
    Air Discharging Methodair hole
    Linking Bagfunction of bag linking can be set on touch screen
    Air pressure0.4-0.8Mpa (air compressor prepared by customer)
    Voltage220V 50Hz or customized
    Power2.0 Kw
    Overall SizeCustomized

  • Product Videos